GCU-100
Generator Automatic Control and Protection Module
GCU-100 Generator Automatic Control and Protection Module is suitable for most generators available on the market, it is equipped with graphical warning signals and 3 sets of 4 digits LED display to display the real time 3 phase voltage, current, frequency, battery volt, running hours and setting values.
Features
- Micro-Processor Auto Control Protection
- Three Sets of High Illuminating LED Display Suitable for Indoor and Outdoor Use
- Full Function Modularized Design for Easy Installation
- All Functions Setting Can Be Done Directly On GCU-100 No Need For PC Connection*
- All settings are recorded into the internal (EEPROM) and protected from erasure even without battery
- Easy to Understand Graphical Warning Signals
- Din Rail Terminal For Easy Installation
- IP65 Waterproof Front Panel
<p class="anno"><span class="red">*</span>User can Program, Change and Cancel Protection and Warning Settings according to the requirement</p>
Specifications
Model NO. | GCU-100 |
---|---|
Power Input | Voltage 9~35 VDC (12V , 24V) |
Sensing Input | Voltage 15~510 VAC Frequency 50/60 Hz |
Power Dissipation | Max. 5 watt |
MPU Signal Input | Voltage ±2 to ±70 VAC Frequency Min. 100 Hz , Max. 10 KHz |
CT Specification | Burden Above 2.5 VA |
CT Secondary Ratio | 5A |
Protection & Alarm Status |
|
Panel Display |
|
Environment | Operating Temperature : -20~70 °C Relative Humidity : Maximum 90% Max. Vibration : 5~25 Hz , ±1.6 mm , 25~100 Hz , a=4g |
Panel Installation Cut-Out | 137.0 x 137.0 ±0.5 mm |
Dimensions | 147.8 (L) x 147.8 (W) x 62.3 (H) mm |
Weight | 604 g ±2% |
*Note : All features & specifications subject to change without notice.