ECU-02
Generator Set Control Unit
The ECU-02 is one of Kutai's best selling Micro Processor based design Digital Genset PLC Control Unit. It offers full engine and generator protections with simple operation and programming without the use of PC connection or software.
Features
- Micro-Processor Based Design
- Easy-to-Read Large LED Display
- Compact Size with Vibration Protected
- Provides Full Engine & Generator Alarms Signals & Shut Downs
- 2 Wire Remote Start & Stop
- Front Panel Mounted With Manual, Off & Auto Switch
- Provided With Easy-to-Install Auxiliaries, Relays & Fuses
- No Need for Magnetic Pick-up to Check Over Speed
- Simple Operation & Programming*1
- No Battery Power Needed to Maintain Program*2
<p class="anno"><span class="red">*1</span> There is no need for PC connection or software--all operation can be done directly on ECU-02.<br/><span class="red">*2</span> Customized settings are auto-saved into memory and will remain even when power is off.</p>
</div>
Specifications
Model NO. | ECU-02 |
---|---|
Power Input | Voltage 9~30 VDC |
Sensing Input | Voltage 15~380 VAC 3 phase 3 wire Frequency 50~60 Hz |
MPU Signal Input | Voltage ±2V to ±70V Peak Frequency Min. 100 Hz , Max. 10,000 Hz |
Power Dissipating | Max. 7 watt |
CT Specifications | Burden Above 2.5 VA CT range Min. 25A / 5A , Max. 3000A / 5A |
Control Signals | Current 2.5 Amp with input volts |
Protection & Alarm Status |
|
4 Digit 7 Segment Easy-to-Read LED Display |
|
Environment | Operating Temperature : -25~75 °C |
Panel Installation Cut-Out | 137.5 x 67.0 ±0.5 mm |
Dimensions | 144.0 (L) x 72.0 (W) x 90.0 (H) mm |
Weight | 374 g ±2% |
*Note : All features & specifications subject to change without notice.